www.kecoinc.com

Home

Permeation Transfer Monitor Info.

White Paper: Volatile Hydrocarbon Analysis in Water

Membrane Sample Transfer Info.

Membrane Probe Sample Transfer Unit

Permeation Tube Calibrator Info.

This Page

Microliter Fluid Calibrator Info.

Sensor Calibration Info.

White Paper

TNRCC Letter
Keco R&D Inc.
1400 B Graham Drive
Tomball, TX 77375

  For more information,
call us,
Email us or
fill in  the following and 
press Submit :

 



STANDARD PERMEATION TUBES

Permeation tubes classified as "standard" are normally carried in stock. They are quickly assembled from in-house finished parts and supplies. These standard permeation tubes readily pass our quality control tests, allowing for fast delivery.

Model Number Tube Dimensions Outlet Description
131 1/2" OD x 4 5/16" Male thread with seal washer, 5/16"-24
167 5/8" OD x 4 5/16 Male thread with O-ring seal, 3/8"-24
105 1.05" OD x 6 5/8 Stub for tee connection or syringe needle 1/4" OD x 5/16" long
159 1.05" OD x 4 5/16 Same as Model 167 or with stub
155 1.05" OD x 2 3/4 Same as Model 105 or "Plain End"

Aluminum alloys are used to construct standard permeation tubes and are compatible with many gases, liquifiable gases and liquids. Teflon™ is used for chlorine.

SPECIAL PERMEATION TUBES (NON-STANDARD)

Permeation tubes are designed as "Special" when they are of non-standard specifications. These special tubes may be:

* Constructed from materials other than aluminum,
* Constructed in sizes other than those shown above,
* Have unusual features, such as different size thread, and/or
* Used to permeate unusual chemicals.

Because of these special requirements, quality control tests may extend date of delivery. Call for further information about special orders.

CHEMICAL LIST

A list of chemicals used for permeation devices as manufactured by Keco R&D, Inc.*:

Acetone
Acetylene
Acetonitrile
Ammonia
Benzene
Butane
Butyl mercaptan
Carbon disulfide
Carbon dioxide
Carbon monoxide
Carbonyl sulfide
Chlorine
Dimethyl formamide
Dimethyl sulfide
Dimethyl disulfide
Ethyl alcohol
Ethyl mercaptan
Ethylene
Ethylene oxide
Hexane
Hexene
Hydrochloric acid
Hydrogen sulfide
Isopropyl alcohol
Isoprene
Methanol
Methyl alcohol
Methyl chloride
Methyl ethyl ketone
Methyl mercaptan
2-Methylbutadiene
Nitrogen dioxide
Propane
Propyl alcohol
Propylene oxide
Sulfur dioxide
Toluene
Trichloroethylene
Water


* Consult factory for other materials available.

| Home |
| Permeation Trans. Monitor | Volatile Hydro. Anal. |
| Membrane Sample Trans. | Membrane Probe Trans. |
| Permeation Tube Calibrator | Permeation Tubes |
| Microliter Fluid Calibrator | Sensor Calibration |
| Membrane Transfer Technology | TNRCC Letter |

Teflon® is a registered trademark E.I. DuPont de Nemours.

Phone: 281-516-3950 Fax: 281-351-8925
E-Mail: Sales@AsiWebPage.com
Keco R&D Inc.
 

™ Trademark Keco R.&D., Inc.
Patent # 5,156,334 and Patent Pending
© 1994-2001 Keco R.& D., Inc.