ASI Provides H2S On-Line Process Analyzer Explosion Proof ASTM Method
 

Home|Products|Quote Request|Contact

Analyzers for Gas
H2S in Gas & LPG's
CO2 in Gas
Total Sulfur in Gas & LPG's

 
Houston Atlas Tracor ONIX  Thermo

 
H2S & Total Sulfur in Gas &  LPG's
Analyzers for Liquids
VOC's in Water
Oil in Water
H2S in Liquids
Analyzer Accessories
Fugitive Emission Units

 
H2S Sensing Tapes & Cassette
Sensors Air Quality
Smart Sensors
Personal H2S Sensor
Monitors Air Quality
Cabinet NEMA4 Mounting
Panel Mounting
Rack Mounting
Contact Us
Quote Request
Sales
Technical Service
Accounting

H2S On-Line Process Analyzer Explosion Proof ASTM Method
Series 1200

 
Page Two/Tech Data
(.pdf) Brochure
Request Quote for H2S Analyzer On-Line Process Explosion Proof ASTM Method
 
H2S Analyzer Features

 
H2S Analyzer 1200 Series
ASTM Approved Method
Continuous Analysis
PPB, PPM Thru % Ranges
Direct Read LCD
Dual Processors for 100% Analysis & Communication
Fault Diagnostics
Cost-Effective
Explosion Proof Configuration
Remote Operation & Access
18-Bit A/D Converter with Faster Response, Lower Detectable Limits, & Less Tape Consumption
Automatic Calibration
Specific for H2S Only

Description

The petrochemical, gas processing, and gas pipeline industry has required an accurate and dependable, low maintenance and cost-effective H2S analyzer for quality and process control purposes. With over thirty years of experience in developing and manufacturing gas analyzers and associated parts and supplies, Analytical Systems International has met these requirements with their proven microprocessor based analyzer. This hydrogen sulfide analyzer or monitor provides continuous on-line process analysis based on the specific and interference free ASTM approved tape principle of operation. The process stream is regulated to 10 PSI. Then a precision flow meter regulates the sample flow and is humidified. Next, the sample is introduced to the specific lead acetate sensing tape that provides an output proportional to the concentration of H2S through the photodiode detector and LED light source optical system. This signal is digitized and analyzed by the advanced microprocessor and related software resulting in a linear 4-20ma output. The LCD display provides the current reading, any alarm condition, procedure prompts (i.e. calibration), and failure indicators. Quality materials are selected for compatibility and are utilized throughout the manufacturing process.
This reliable field proven analyzer system continuously and specifically quantifies the H2S level in the sample with minimal maintenance. The principle of operation is described in various ASTM methods include D4084-82, D4468-85, and D4045-81.
 
Page Two/Tech Data
(.pdf) Brochure
Request Quote for H2S On-Line Process Analyzer Explosion Proof ASTM Method